How do you write-protect a floppy disk - Answers.
To write protect a disk of this type, simply fold a piece of sturdy tape (like masking tape) over these notches and the disk will be protected. Most discs come with adhesive tabs for this purpose.
A floppy disk, also known as a floppy, diskette, or simply disk, is a type of disk storage composed of a disk of thin and flexible magnetic storage medium, sealed in a rectangular plastic enclosure lined with fabric that removes dust particles. Floppy disks are read and written by a floppy disk drive ( FDD ).
On one corner, there should be a sliding tab. If you hold the disk so that the edge that goes into the drive is at the bottom, this should be in the top left corner. If the movable part of the sliding tab is up, so that there's a hole in that corner of the disk, the disk is write-protected.
In order to write on a disk, this notch must be present. If you want to protect a disk from accidental loss of data, cover this notch with a strip of tape. Strips of tape for write protection are usually provided in the box with the disks. Central Hub Access Hole In the center of the disk is a big hole known as the central hub access hole.
Right now, the only floppy I have is the 5.25 DOS 3.3 system floppy. I am unable to save to it because it is write protected. I would like, if possible, to disable the write protection. I can get access to blank floppies later, but it will be a month or so before that is possible.
A special program is used to write the image files to floppy disk in raw mode. This is required because these images are raw representations of the disk; it is required to do a sector copy of the data from the file onto the floppy. There are different techniques for creating floppies from disk images. This section describes how to create.
It is a good idea to write protect on a floppy disk because it is a back to make sure the disk doesn't get overwritten. A disk can also be write protected by pushing a small tab on top of the disk.
To do so, you will have to disable the CD write protection. With floppy disks, you could usually do this by moving a lever at the bottom edge of the disk. With CDs, you must change a software setting.
If you can see through the square hole behind the tab, the diskette is write-protected. If the hole is covered by the tab, the diskette is write-enabled. (If you need to eject the diskette to examine it, simply type eject floppy in a shell.) Insert the diskette. Make sure the diskette is completely inserted. It must drop down into the drive.
Many people were or are using these controllers with 8-inch floppy drives, or to read and write 5.25-inch and 3.5-inch Mac and Apple disks, or TRS-80 disks. If you can program, this may be an option for running 8-inch drives with wierd formats on a Windows PC.
A floppy disk was write-protected when the plastic tab at the top was moved to reveal a “hole” in the disk. Sliding the tab up or down switched the floppy disk to enable or disable write-protection. Memory cards used in your camera have the option to write-protect.
Formatting Floppy Disk. Embird supports standard and non-standard floppy disk formats. Standard floppy disks are disks with designs stored in standard MS-DOS format. These disks are recognized and can be accessed in Windows Explorer, common file manager or any other application supporting floppy disks.
There is a plastic switch on the upper right corner of the disk that can be moved up and down from the back of the disk. Verify that the switch is down, so that you can not see through the hole. When this switch is in the up position, the floppy disk is write-protected and cannot be written to (see Figure).
